The conductive hole Via hole is also called the conductive hole. In order to meet the customer's requirements, the conductive hole of the circuit board must be plugged. After a lot of practice, the traditional aluminum chip plugging process is changed, and the white plate is used to complete the circuit board surface soldering and plugging. hole. Stable production and reliable quality.
The Via hole leads the connection of the lines to each other. The development of the electronics industry also promotes the development of PCBs. It also places higher demands on the manufacturing process and surface mount technology of printed boards. The Via hole plugging process came into being, and the following requirements should be met:
(1) There is copper in the via hole, and the solder resist can be plugged or not;
(2) There must be tin-lead in the via hole, which has a certain thickness requirement (4 micrometers), and no soldering ink is allowed to enter the hole, resulting in the inclusion of tin beads in the hole;
(3) The via hole must have a solder-proof ink plug hole, which is opaque, and must not have tin ring, solder ball and leveling requirements.
With the development of electronic products in the direction of “light, thin, short and smallâ€, PCBs are also developing at a high density and high difficulty. Therefore, a large number of SMT and BGA PCBs are present, and customers require plugging holes when mounting components. Five roles:
(1) Preventing the short circuit of the solder from passing through the component surface when the PCB is over-wave soldering; especially when we place the via hole on the BGA pad, we must first make the plug hole and then gold-plated to facilitate the BGA soldering.
(2) avoiding flux remaining in the via hole;
(3) After the surface mounting and component assembly of the electronics factory is completed, the PCB is vacuumed on the test machine to form a negative pressure:
(4) preventing the surface solder paste from flowing into the hole to cause solder joints and affecting the mounting;
(5) Preventing the soldering of the solder balls from over-wave soldering, causing a short circuit.
Implementation of conductive hole plug hole process
For surface mount boards, especially for BGA and IC mounting, the via hole must be flat, positive and negative 1 mil, no red tin on the edge of the via hole; tin beads in the via hole, in order to reach the customer The requirements of the through hole plug hole process can be described as various, the process is particularly long, the process control is difficult, often in the hot air leveling and green oil solder resistance test oil drop; the problem of oil explosion after curing occurs. According to the actual conditions of production, the various plugging processes of PCB are summarized, and some comparisons and explanations are made in the process, advantages and disadvantages:
Note: The working principle of hot air leveling is to remove excess solder from the surface of the PCB and the holes by hot air. The remaining solder is evenly covered on the pads and the unresisted solder lines and surface package points, which is one of the ways of surface treatment of printed circuit boards.
First, hot air leveling and plugging process
The process flow is: plate surface solder mask → HAL → plug hole → solidification. The production is carried out by a non-plugging process. After the hot air is leveled, the aluminum mesh screen or the ink-blocking net is used to complete the via hole of all the plugs required by the customer. The plug ink can be made of photosensitive ink or thermosetting ink. In the case of ensuring the same color of the wet film, the plug ink preferably uses the same ink as the board surface. This process can ensure that the through hole does not drop oil after the hot air is leveled, but it is easy to cause the plug hole ink to pollute the surface and uneven. Customers are prone to soldering during placement (especially within the BGA). So many customers do not accept this method.
Second, the hot air leveling front plug hole process
2.1 Using aluminum sheets to plug holes, solidify, and grind the board for pattern transfer
This process uses a CNC drilling machine to drill the aluminum sheet of the plug hole to make a screen plate, to make the plug hole, to ensure the plug hole is full, the plug ink plug hole ink, and the thermosetting ink can also be used, and the characteristics must be hard. The resin shrinks little and has good adhesion to the pore walls. The process flow is: pre-treatment → plug hole → grinding plate → pattern transfer → etching → surface solder mask
This method can ensure that the through hole of the through hole is flat, the hot air leveling will not have quality problems such as oil explosion and oil drop at the hole, but this process requires thickening copper at one time, so that the copper thickness of the hole wall reaches the customer's standard. Therefore, the whole plate copper plating is very demanding, and the performance of the plate grinding machine is also very high, ensuring that the resin on the copper surface is completely removed, the copper surface is clean and not polluted. Many PCB factories do not have a one-time thick copper process, and the performance of the equipment does not meet the requirements, resulting in the use of this process in the PCB factory is not much.
2.2 Direct screen printing surface soldering after plugging with aluminum
This process uses a CNC drilling machine to drill the aluminum sheet of the plug hole to make a screen. It is installed on the screen printing machine to carry the plug hole. After the plug hole is completed, it should not be parked for more than 30 minutes. The screen is directly screen printed with 36T screen. The process is: pre-treatment - plug hole - silk screen - pre-bake - exposure - development - curing
This process can ensure that the through-hole cover oil is good, the plug hole is flat, the wet film color is consistent, the hot air leveling can ensure that the conduction hole is not tinned, the tin beads are not hidden in the hole, but it is easy to cause the ink in the hole after curing The pad causes poor solderability; after the hot air is leveled, the edge of the via hole is foamed and oil is lost. It is difficult to use this process for production control, and the process engineer must use special procedures and parameters to ensure plug quality.
2.3 Aluminum plate plug hole, development, pre-curing, after the plate is polished.
Using a CNC drilling machine, the aluminum piece required to be plugged is drilled to make a screen, which is installed on the shift screen printing machine to make the plug hole, the plug hole must be full, the two sides protrude better, and then the solidified plate is processed for the surface treatment. The process is: pre-treatment - plug hole pre-bake - development - pre-cure - surface solder mask
Since the process uses plug hole curing to ensure that the HAL does not drop oil and oil after the HAL, after the HAL, the tin in the via hole and the tin on the via hole are difficult to completely solve, so many customers do not receive it.
2.4 Plate surface soldering and plugging are completed at the same time.
This method uses a 36T (43T) screen, installed on the screen printing machine, using a pad or a nail bed, and plugs all the through holes while completing the board surface. The process flow is: pre-treatment - silk screen - - Prebaking - exposure - development - curing.
The process time is short, the utilization rate of the equipment is high, the hole can be ensured that the hot air is not drained, and the via hole is not tinned. However, since the screen hole is used for plugging, a large amount of air is stored in the via hole, and when solidified, The air expands and breaks through the solder mask, causing voids and unevenness. The hot air leveling will have a small amount of conductive vias. At present, after a large number of experiments, our company chooses different types of inks and viscosity, adjusts the pressure of silk screen, etc., basically solves the voids and irregularities of the via holes, and has been mass-produced by this process.
The ultra-thin precision cutting of the Anti-Peep Screen Protector means that you can enjoy a perfect touch screen experience without allowing anything on the screen to be peeped. Whether you place your phone horizontally or vertically, Privacy Screen Protector can protect your personal Information and sensitive information are protected from harm by strangers. People around you cannot see the contents of your phone, so your details are safe.
The use of soft TPU material can really cover the entire screen.
With self-healing function, it can automatically repair bubbles and scratches within 24 hours.
The 0.14mm Ultra-Thin Protective Film can maintain the sensitivity of the touch screen to accurately respond to your touch.
The oleophobic and waterproof coating prevents fingerprints, oil stains and other substances from adhering to it and keeps the screen clean.
If you want to know more about Privacy Screen Protector products, please click Product Details to view the parameters, models, pictures, prices and other information about Privacy Screen Protector products.
Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about Privacy Screen Protector!
Anti-Spy Hydrogel Screen Protector, Privacy Protection Film, Protection Film, Privacy Film, Privacy Screen Protective Film, Soft Film
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.hydrogelprotectivefilm.com