How to make a mobile power supply? Simple illustration tutorial

Mobile power supply A portable charger that integrates power supply and charging functions. The benefits it brings are also very high. For example, when you go out, you can charge the mobile phone without plugging in, and you can charge many electronic products in time. For example, mobile phones, PDAs, digital cameras, etc. So how do you make a mobile power supply yourself? This article has a detailed illustration tutorial.

How to make a mobile power supply? Simple illustration tutorial

Modern society has entered the mobile era, and various handheld devices, such as mobile phones, tablets, and notebooks, have entered thousands of households and are closely integrated with our lives. The handheld device is light and easy to carry. The only bad thing is that the power-off time is too short. It is better to make a mobile power supply and replenish the power anytime and anywhere!

materials needed:

Transistor npn and L7805CV Zener, capacitor 50v10u and 50v4.7u, ceramic capacitor 104pf, wire, hot melt adhesive, diodes 4004 and 4148, battery case, usb female, advertising card (housing), switch.

Production steps:

How to make a mobile power supply? Simple illustration tutorial

The USB is attached to the case.

How to make a mobile power supply? Simple illustration tutorial

positive.

How to make a mobile power supply? Simple illustration tutorial

Voltage regulator board. The output is 5v.

How to make a mobile power supply? Simple illustration tutorial

This is a circuit diagram.

How to make a mobile power supply? Simple illustration tutorial

One inductor.

How to make a mobile power supply? Simple illustration tutorial

Two diodes.

How to make a mobile power supply? Simple illustration tutorial

One of the triodes.

How to make a mobile power supply? Simple illustration tutorial

One capacitor.

How to make a mobile power supply? Simple illustration tutorial

Made a Joule thief.

How to make a mobile power supply? Simple illustration tutorial

It is best to do this.

How to make a mobile power supply? Simple illustration tutorial

have a test.

How to make a mobile power supply? Simple illustration tutorial

Connect the voltage regulator, how to see the circuit diagram.

How to make a mobile power supply? Simple illustration tutorial

The test is not 5v.

How to make a mobile power supply? Simple illustration tutorial

Connected to the mother seat, the positive and negative are not reversed.

How to make a mobile power supply? Simple illustration tutorial

Test on the machine to see if it can be used.

How to make a mobile power supply? Simple illustration tutorial

The regulator board is fixed in the housing with hot melt adhesive.

How to make a mobile power supply? Simple illustration tutorial

The Joule thief is also inside.

How to make a mobile power supply? Simple illustration tutorial

This is followed by a battery compartment, which is a single-segment skip. It is a double festival with me.

How to make a mobile power supply? Simple illustration tutorial

Stick it with hot melt glue.

How to make a mobile power supply? Simple illustration tutorial

The last is this way.

How to make a mobile power supply? Simple illustration tutorial

The battery box is connected to the Joule Thief.

How to make a mobile power supply? Simple illustration tutorial

have a test.

How to make a mobile power supply? Simple illustration tutorial

Finally install the switch and connect it like this on the picture.

How to make a mobile power supply? Simple illustration tutorial

Install the outer casing and what shape it will do. It depends on you.

How to make a mobile power supply? Simple illustration tutorial

Mine is like this, triangular.

How to make a mobile power supply? Simple illustration tutorial

With the machine trial, the mobile power test is successful!

3D Relief Back Sticker

If you are tired of the original back of your phone, you should try our 3D Relief Back Sticker. The Back Skin Protective Film on the back can not only bring you a visual change, but also protect the back cover of the phone itself from scratches and collisions. Real 3D touch, personalized and stylish pattern design. Bring you a perfect experience.

In daily use, it can protect the equipment from scratches, dust, impact and other damage.

Long-lasting anti-scratch effect, significantly reducing dust, oil stains and fingerprint stains.

Easy to install, easy to stick to the back of the phone, and will not damage the original appearance of the phone.

With the Protective Film Cutting Machine, you can install the Back Film on different types of mobile phone back shells, including mobile phones, tablet computers and other electronic products. Customization can be completed in 30 seconds with just one click.

If you want to know more about 3D Relief Back Sticker, please click product details to view the parameters, models, pictures, prices and other information about 3D Relief Back Sticker.

Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about 3D Relief Back Sticker!

3D Phone Sticker, Carbon Fiber Back Sticker, 3D Relief Back Sticker, 3D Printing Back Sticker, Phone Skin,Mobile Phone Back Sticker

Shenzhen Jianjiantong Technology Co., Ltd. , https://www.tpuscreenprotector.com

Posted on