What is the inverter _ inverter principle _ inverter circuit diagram introduction

Inverter introduction

The inverter converts DC power (battery, battery) into alternating current (typically 220V, 50Hz sine wave). It consists of an inverter bridge, control logic and filter circuits. Widely used in air conditioners, home theaters, electric grinding wheels, power tools, sewing machines, DVD, VCD, computers, televisions, washing machines, range hoods, refrigerators, video recorders, massagers, fans, lighting, etc. In foreign countries, because of the high penetration rate of automobiles, you can use the inverter to connect the battery to drive electrical appliances and various tools. The vehicle inverter output through the cigarette lighter is 20W, 40W, 80W, 120W to 150W power specifications. More power inverter power supplies are connected to the battery through the cable. Connecting appliances to the output of the power converter allows for the use of various appliances in the car.

What is the inverter _ inverter principle _ inverter circuit diagram introduction

Inverter features

1. High conversion efficiency and fast startup;

2. Good safety performance: The product has five kinds of protection functions: short circuit, overload, over/under voltage and over temperature;

3. Good physical properties: The product adopts all-aluminum shell, good heat dissipation performance, hard oxidation treatment on the surface, good anti-friction performance, and can resist extrusion or impact of certain external force;

4. With load adaptability and stability

Inverter structure

The inverter consists of three parts: inverter circuit, logic control circuit and filter circuit. It mainly includes input interface, voltage start circuit, MOS switch tube, PWM controller, DC conversion loop, feedback loop, LC oscillation and output loop, load. And other parts, as shown below.

What is the inverter _ inverter principle _ inverter circuit diagram introduction

Inverter working principle

The inverter is a DCtoAC transformer, which is actually a process of voltage inversion with the converter. The converter converts the AC voltage of the grid into a stable 12V DC output, and the inverter converts the 12V DC voltage output from the Adapter into a high-frequency AC power. Both parts also use more pulse widths. Modulation (PWM) technology. The core part is a PWM integrated controller, the Adapter uses UC3842, and the inverter uses TL5001 chip. The TL5001 operates from a voltage range of 3.6 to 40V and features an error amplifier, a regulator, an oscillator, a PWM generator with dead-band control, a low-voltage protection loop, and a short-circuit protection loop.

Input interface part: The input part has 3 signals, 12V DC input VIN, working enable voltage ENB and Panel current control signal DIM. VIN is provided by the Adapter. The ENB voltage is provided by the MCU on the main board. The value is 0 or 3V. When ENB=0, the inverter does not work, and when ENB=3V, the inverter is in normal working condition; and the DIM voltage Provided by the main board, the range of variation is between 0 and 5V. The different DIM values ​​are fed back to the feedback end of the PWM controller. The current supplied by the inverter to the load will also be different. The smaller the DIM value, the current output by the inverter. It is bigger.

Voltage Start Circuit: When ENB is high, the output voltage is high to illuminate the backlight tube of the Panel.

PWM controller: It has the following functions: internal reference voltage, error amplifier, oscillator and PWM, overvoltage protection, undervoltage protection, short circuit protection, output transistor.

DC conversion: The MOS switch tube and the energy storage inductor form a voltage conversion circuit. The input pulse is amplified by a push-pull amplifier and then drives the MOS tube to perform a switching action, so that the DC voltage charges and discharges the inductor, so that the other end of the inductor can be exchanged. Voltage.

LC oscillation and output circuit: ensure the required voltage of 1600V to start the lamp, and reduce the voltage to 800V after the lamp is started.

Output voltage feedback: When the load is working, the sampling voltage is fed back to stabilize the voltage output of the I inverter.

Elux Vape

The ELUX Vape Legend 3500 puffs is one of the most popular series of ELUX. It tastes similar to ELFBAR and sells very well in the UK market. TSVAPE is a Chinese supplier, if you have an e-cigarette wholesale business, please feel free to contact us.


3500 Puff 10ml Elux Legend UK Disposable Cigarette


We sell 100% original ELUX 3500 legend Disposable Vape products at a reasonable price. This product is very popular in UK and is the best choice for your Famous Brand E Cigarette business.


Basic Info.

Model NO.4

Nicotin Concentration

Low

Disposable

Disposable

Flavor

Fruits Series

Fully Charged Time

Disposable

Mechanical Mod

Non-Mechanical

Variable Voltage

Non-Variable Voltage

Variable Wattage

Non-Variable Wattage

Suitable for

ALL>18

Logo Printing

With Logo Printing

Product Category

Closed Vape Pod System

Flavors

Blue Razz ,Mint,Grape Freezz,Green Apple,Pineapple

Battery Capacity

1500mAh

Pod Capacity

10ml

Mouth Count

3500 Puffs Allow You to Take Longer

Nicotin

2%-5%

Style

Non-Refillable Portable Disposable Vape Stick

Package

Candy Wrapper for Each Piece Each Box for Candy

Shipment

DHL UPS FedEx Expressways

Lead Time

Within 24hours for Random Flavor Shipping

Transport Package

Gift Bottle/Carton Box

Specification

10ml


Elux 3500puffs Disposable VapeElux 3500puffs Disposable VapeElux 3500puffs Disposable Vape

Elux Vape,Elux Disposable Legend Bluk,Elux Disposable Electronic Cigarette,Elux Vape Kit,Elux Vape Pod

Tsvape E-cigarette Supplier Wholesale/OEM/ODM , https://www.tsecigarette.com

Posted on