For the suspension of the VRX900 series, it is recommended to use the JBL original hanging kit. So far, JBL has three hanging kits, of which VRX932LA-AF has been discontinued and is not recommended for hanging active VRX900P. The number of VRX900 speakers that can be hung in various hanging kits is shown in the table below.
How to properly use the hanging kit to lift the VRX900?
Take VRX-AF as an example.
1. First connect the two side arms (A) of the hanging kit to the center frame. Secure with the pin (B) provided in the kit.
2. Place the entire hanging frame on the top speaker of the VRX900 array to be hung, and fold the hanging rods (C) on both sides of the speaker into the frame side arms.
3. Secure with the pin (D) provided in the hanger kit.
Note: The blue "inline" latches provided in the VRX-AF suspension kit must be used to secure the suspension frame and speakers. Do not use the black “L-shaped†latch built into the speaker to secure the hanging frame to the speaker, as this may cause the pin to break and cause the speaker array to fall.
Wifi 6 Ceiling Wireless Ap,Access Point Ceiling Mount,Ceiling Access Point Poe Wifi 6,Wireless Mu-Mimo Gigabit Ceiling Access Point
Shenzhen MovingComm Technology Co., Ltd. , https://www.movingcommtech.com