Electromagnetic compatibility (EMC) is a discipline that studies how various electrical devices (generally including organisms) can coexist without degrading under limited conditions of space, time, and spectrum resources. It includes electromagnetic interference and electromagnetic sensitivity. The electromagnetic interference test measures the magnitude of the electromagnetic wave signal generated and emitted by the device under test under normal working conditions to reflect the strength of the surrounding electronic equipment. The electromagnetic sensitivity test measures the immunity of the device under test against electromagnetic disturbances. Electromagnetic interference mainly includes radiation emission and conduction emission. In other words, what we want to study is that the compatibility of electronic and electrical products is mutually exclusive, that is, they do not interfere with each other and will not cause any degradation of system performance due to interference from any of the other electronic appliances. When you use a hair dryer or start any electric device with a built-in motor, there is clutter on the monitor screen. When the image is disturbed and the sound is heard on the sound, the phone suddenly sounds a “beep†due to an incoming call from the mobile phone. These are all electronic products. Incompatibility resulted.
EMC Certified Inspection ProjectEMC certification of electrical products The EMC inspection project includes electromagnetic emission (EMI) and electromagnetic immunity (EMS): Electromagnetic emission (EMI) inspection items include:
Electromagnetic emission (EMI) inspection items include:
1. Continuous interference voltage (150kHz ~ 30MHz);
2. Intermittent interference voltage (clicks) (150kHz, 500kHz, 1.4MHz, and 30MHz);
3. Interference power (30MHz～300MHz)
4. Harmonic current (2-40th harmonics)
Electromagnetic immunity (EMS) test items include:
1. Electrostatic discharge immunity;
2. Radiation electromagnetic field (80MHz ~ 1000MHz) immunity;
3. Electrical fast transient/burst immunity;
4. Surge (lightning strike) immunity;
5. Injected current (150kHz ~ 230MHz) immunity;
EMC certification standards1. GB 4343-1995 "Measuring methods and permissible values ​​of radio disturbance characteristics of household and similar electric, electric appliances, electric tools and similar electrical appliances", which was issued on August 25, 1995 and implemented on December 1, 1996. .
2. GB4343.2-1999 “Electromagnetic Compatibility with Household Appliances, Power Tools, and Similar Appliances Requirement Part 2 Immunity†This standard was issued on March 23, 1999 and implemented on April 1, 2000.
3. GB 17625.1-1998 "Harmonic current limits issued by low-voltage electrical and electronic equipment (equipment with equipment current of £16A per phase)" This standard was issued on December 14, 1998 and implemented on December 1, 1999. . At present, the standard is encouraged to adopt. If it fails, it will not be the basis for the overall judgment of the certification.
EMC Certified Sampling and Decision Rules1. Randomly select 4 samples from 30 to 50 sampling mothers, of which 3 samples are used for inspection and 1 sample is used for the company's reserve for future reference. If the number of mothers is greater than 50, 50 samples can be randomly selected as sampling parents. .
2. The company randomly selects one sample from the three samples used for inspection and sends it to the designated EMC laboratory for inspection. The inspection result is judged according to the limit specified in the implementation standard of the certification by 2 dB.
3. If the measurement result of a single sample satisfies the strict 2dB limit specified by the certification implementation standard, the sample is judged as qualified.
4. If the measurement result of a single sample does not meet the requirements of the limits specified in the certification implementation standards, the sample inspection shall be judged as unqualified.
5. If the measurement result of a single sample satisfies the requirements of the limits specified in the certification implementation standards, but does not meet the strict 2dB limit as specified in the certification implementation standards, the company shall send the other two samples taken for inspection to the testing organization for inspection. If the results of the 2 samples submitted for inspection meet the requirements of the limits specified in the certification implementation standards, the samples shall be judged to be qualified, otherwise, the samples shall be judged as unqualified.
EMC test equipment purchase notes:First, it is best to choose powerful companies. At present, there are some domestic manufacturers in the society for two or three people. You should be cautious when purchasing such manufacturers.
Second, buy suitable for their own products, in fact, many domestic manufacturers EMS test equipment to do a good job. . Because too expensive instruments can bring financial burden on the company. So compare a lot when you purchase the instrument.
Third, after-sales service guarantee. Service is a key issue for EMC test instruments. Because many technicians are still unfamiliar with EMC, there are more or less minor problems. There are a total of three or four domestic manufacturers, and several manufacturers are: Shanghai Sanji, Shanghai Prima, Suzhou Taisite, Hangzhou Yuanfang and so on.
Shanghai Sanji is the longest in the EMC industry, and several other companies are similar. Now the product as a whole to do a comparison as follows: Of course, the premise of all manufacturers of products should be consistent with IEC61000-4 and GB/T17626.4 standards, so it is necessary to have a certificate of measurement institute. Everyone can make such a request when they choose.
Product appearance: Shanghai Sanji has not changed, old faces, digital display, pressure regulator to adjust high pressure. Use a few buttons to perform basic functions. There is no major technical progress.
Shanghai Primera's new face, LCD display, programmable high voltage power supply generates high voltage, all parameters are set on the interface. All remote products in Hangzhou, digital display, pressure regulator to adjust high pressure, with a number of buttons to achieve basic functions. All the products of Suzhou TEST are similar to those of Hangzhou. The digital display shows that the regulator regulates the high voltage and uses multiple buttons to realize the basic functions. Only the chassis is different.
we are professional disposable vape manufacturer from shenzhen china and can offer one stop oem& odm vape service. Disposable vape pen,disposable electronic cigarette,vape pen,disposable ecigs,ecigs pen,e-cigs pen,vape pod,ELFBAR disposable vape pen is portable and fashion disposable electronic cigarette, disposable ecigs pen are trending featured vape pen for vapors as it's safety and easy to use. Disposable vape pod,disposable vape, wholesale vape,vape wholesale,vape pen manufacturer and supplier.disposable vape pen,disposable electronic cigarette,disposable ecigs pen,disposable ecigs stick,disposable e-cigs pen,disposable vape factory,disposable vape pod,disposable vape device,vape pen,vape stick, vape wholesale,wholesale vape,customized dispsoable vape pen,customized vape pen,OEM&ODM disposable ecigs pen,disposable electronic cigarette wholesale, wholesale disposable electronic cigarette,distribute vape pen,vape pen distribute,high quality vape pen,high quality vape pod.
ELF BAR,Tpd Compliant Vapes,Original Onlyrelx Vape,Disposable E-Cigarette Onlyrelx,Vapeorizer Pen
Shenzhen Onlyrelx Technology Co.,Ltd , https://www.onlyrelxtech.com