LED lighting began to Jedi**

In the Lantern Festival, nearly a hundred groups of giant Zigong lanterns lit up Lake Donghu. The first attempt was made for LED and other high-tech elements. In 2014, Fuzhou City Lantern Festival also boldly innovated, using more new materials and techniques, and adding a lot of fashion, novelty, and fun. Elements, through the traditional small lanterns and LED lights, so that the lights show a clear hierarchy ... ...

There is no doubt that LED lighting is booming in the Year of the Horse. This is so, in addition to the distinctive colors of LED lighting, more importantly, all users are fancy the energy-saving emission reduction effect behind LED lighting.

Energy conservation is the "hard truth"

Recently, it was learned from the National Semiconductor Lighting Engineering R&D and Industry Alliance (CSA) that since the implementation of the “Ten City Wanhao” semiconductor lighting application demonstration project, 21 pilot cities have used more than 1.6 million LED lamps, saving more than 164 million kWh These cities have a total of more than 2,000 semiconductor lighting companies with an output value of approximately 75.9 billion yuan, initially forming industrial clusters. At the same time, the “Ten Thousand Cities” project has also driven the development of related industries. Energy-saving buildings, solar photovoltaics, home appliances, automobiles, electronic information and other industries have thus obtained more extensive development space.

Local governments have made some achievements and experiences under the leadership of the central government. At the “Energy Saving and Emission Reduction Promotion Conference for Semiconductor Lighting” jointly sponsored by the Ministry of Science, Ministry of Finance, and the National Development and Reform Commission before the Spring Festival, Huang Ningsheng, Director of the Department of Science and Technology of Guangdong Province, introduced that LED is one of the strategic emerging industries that Guangdong has focused on developing. As of 2013 At the end of October, Guangdong has installed more than 800,000 LED street lights. It is estimated that by 2014, 2 million LED's in public lighting in Guangdong will be completed. The output value and patents of the LED industry will also increase year by year; In September, Beijing Municipality promoted 450,000 LED display lamps and LED spotlights in hotels and restaurants, with an annual saving of 30 million kWh. According to relevant persons from Xiamen City, the LED industry in Xiamen City has developed rapidly as one of the first cities to initiate LED planning. In the process of “10 cities and 10 thousand projects” promotion, the city adopted inter-departmental working groups, issued financial subsidies, conducted enterprise qualification certification, supported foreign enterprises to participate in the project, and compiled a number of local standards and other means to ensure the demonstration effect.

The market is a barometer

In recent years, the country has implemented the project of promoting high-efficiency lighting products and the “Ten Thousand Cities” project. With the promotion of energy-saving lighting products, many lighting manufacturers realize that lamps and lanterns must be energy-efficient when they are to be energy-efficient. This is the premise for promoting efficient and energy-saving lamps.

Before and after the Spring Festival, the LED lighting market is booming. LED lighting manufacturers are deploying their new year's work in full swing to prepare for the opportunity. They are all eager to look forward to 2014 LED lighting can usher in a turning point.

According to Li Bingjie, chairman of Crystal Power Technology Co., Ltd., 2013 is the first year of LED lighting, and there are 500 million LED bulbs in the world, which is expected to double in 2014; Ye Xufu, chairman of the largest LED packaging plant in Taiwan, Yiguang Electronics Industry Co., Ltd. Said that in 2013 LED lighting prices fell, the number of cases of rising, 2014 will be LED lighting sprint years; Taiwan Dongbei Optoelectronics Technology Co., Ltd. Chairman Wu Qinghui said this year is the LED industry Jedi counterattack year, the industry will Good enough to "make people break their glasses"; Taiwan's LED chip factory, Yu Jianyuan, chairman of the board, said that this year will be the key year for the reversal of LED lighting, he expects this year's LED industry is not off-season.

These "bullies" all began to take active actions. In late January 2014, Fortune Group announced that its subsidiary, Fortune Electronics, will cooperate with Siucore Technology and invest RMB 30 billion to establish Zhaoxing Technology Co., Ltd. to establish the fourth and fifth generation LED chip industry bases in Dongguan and seize the LED market. The base is planned to be implemented in four phases. The total investment is estimated to be 30 billion yuan. Its key areas include: research and development and manufacturing of gallium nitride-based, gallium arsenide-based integrated circuits and high-efficiency integrated solar cells; and OLED planar lighting based on independent innovation. Module technology and production equipment R & D and manufacturing. Jinke Electronics (Guangzhou) Co., Ltd. and Lanfei Optical Inc. announced recently that they have become strategic partners and jointly developed technologies for LED, high-power LED epitaxy, chip and module testing, leveraging Lanfei Optical's extensive experience in lighting testing. Technology provides technical support for the development of high-brightness LED integrated chips by Jinke Electronics.

How to solve the development problem

Having said that the advantages and opportunities of LED lighting products are good, the relevant responsible person is more willing to say that the industrial development is facing difficulties from the deep mechanism behind the products. In their view, there are many problems in the LED lighting industry: the concentration of downstream industries is not high, and companies are uneven. In order to obtain opportunities, some companies adopt low-price bidding in the tendering process, resulting in poor profitability of enterprises with good product quality; The interface of product specifications is not uniform, and the interchangeability of products is poor. There are fewer qualified testing organizations and can not meet the testing requirements. At the same time, the product certification cycle is too long to increase the difficulty of promotion; the difficulty of docking between local government and enterprises, long-term promotion procedures, and local preferential treatment Local companies are also difficult problems to avoid in the promotion process.

All the above companies recommended that relevant government departments support the development of leading enterprises and optimize the market environment; they should actively guide and give preferential tax policies, and reduce the application process and local protectionism. For the tenders of the three ministries and commissions, it is recommended to adopt a priority score for the median price of winning bids to avoid bids at low prices. If possible, it is recommended that e-commerce be used as a subsidy channel to exploit the advantages of recordable and traceable electricity data.

The deputy secretary-general of the CSA, Jun Jun, has also studied the problems of the current LED lighting industry. He believes that the current government procurement project management system needs to be improved, government procurement project bidding, product inspection, on-site spot checks, process monitoring and acceptance assessment and other aspects of the lack of specific management measures; in some places to support the development of the industry, regardless of whether the company is qualified will be The project was handed over to local companies; some projects took bids at low prices, some companies bid at lower than the cost of qualified products, and the inspection products were inconsistent with the actual application products and could not guarantee project quality. At the same time, the subsidy mechanism needs to be improved, local areas have no promotion tasks, and some localities do not pay enough attention and are not included in the fiscal budget; the range of subsidized products is relatively narrow, and some products have a small market usage, and the most widely used tube lights and bulb lamps Not enter the subsidy range; inspection time is too long (6000 hours), so that enterprises can not promote new technologies, new products with high energy efficiency; winning prices are too low, companies have no profit margins.

For these issues, how should the government and enterprises adjust? Jun Jun suggested that market supervision should be strengthened to further regulate the market, establish recommended catalogues of qualified products, introduce credit classification management methods for enterprises, regularly publish product guide prices, etc.; improve government procurement process management, and play a professional, independent third party supervision Role, improve project effectiveness evaluation system, recommend qualified energy service providers directory, strengthen innovation and application of demonstration project construction; improve financial subsidy mechanism, expand the types of subsidized products, simplify and clarify declaration procedures, procedures, avoid low-cost bid, increase bid Purchasing products, strengthening supervision and verification, exploring and formulating new financial subsidy programs, building LED modern service industry, establishing a cloud resource sharing platform and a comprehensive service demonstration platform in the field of semiconductor lighting, integrating service platforms into high-tech service industries, and establishing information Service platform, regularly publish government procurement related information, publicize and promote excellent practice cases; improve the layout of technological innovation, solve the shortcomings of industrial technology, develop multifunctional and intelligent innovative technologies and products, and strengthen innovative applications such as agricultural and medical optical communications Surface layout, and further support the construction of public R & D platform to explore and improve the collaborative innovation model.