A 35-page "2016-2045 Emerging Technology Trend Report" released by the United States some time ago pointed out that the cooperation between the three technologies of Internet of Things, data analysis and artificial intelligence will create a huge world. The intelligent machine network enables massive business transactions without human intervention.
The report says people will be able to use the information from the Internet of Things to deepen their understanding of the world and their lives and make more appropriate decisions.
In 2045, the most conservative forecast also believes that there will be more than 100 billion devices connected to the Internet. These devices include mobile devices, wearable devices, home appliances, medical devices, industrial detectors, surveillance cameras, automobiles, and clothing. The data they create and share will bring a new information revolution to our work and life.
At the same time, networked devices will automate many of the current work, such as monitoring, management, and maintenance.
While the Internet of Things will improve economic efficiency, public safety, and personal life, it will also increase concerns about cybersecurity and personal privacy. Terrorists, criminal groups and hostile forces will use the Internet of Things as a new means of attack.
The report was based on the refinement of 32 scientific and technological trend-related research reports published by government agencies, consulting agencies, think tanks, and research institutions in the past five years. Through the comprehensive comparison analysis of nearly 700 technological trends, the 20 most noteworthy technological development trends were finally identified.
The first release of the report is to help the relevant US departments to have a general grasp of the core technologies that may affect the country's strength in the next 30 years. Second, to indicate the direction of science and technology investment for the state and social capital to ensure the US strategy in the future world. Advantage.
Single Phase Control Transformer
Main components
This product is made of high-strength enamelled wire and high-quality silicon steel sheet. BK series transformer core is shell type, which is laminated by silicon steel sheets; BKC series iron core is C-core type.
Technical characteristics
1. BK, BKC and other series of control transformers (hereinafter referred to as transformers) are applicable to power supply for local lighting in industrial and mining enterprises, power supply for control circuits in electrical equipment, and power supply for signal lights and indicator lights in circuits with AC 50Hz~60Hz and voltage up to 500V.
2. The transformer can work for a long time under rated load.
3. The primary and secondary windings of the transformer are separated. When the secondary has only one winding, it bears all the rated capacity of the transformer. If the secondary has both control, lighting and indicator windings, it is wound separately according to the distribution of winding capacity. For the transformer with single winding and intermediate tap, the capacity of each intermediate tap is less than the rated capacity of the transformer, and only the maximum voltage output terminal can bear the rated capacity.
4. The product meets the standard: GB19212.3-2006.
5. Product insulation grade: Class B III.
Environmental conditions editing broadcast
1. The ambient air humidity is - 5 ℃ to+40 ℃, and the 24-hour average value shall not exceed+35 ℃;
2. The altitude of the installation site shall not exceed 2000 meters;
3. The relative humidity of the atmosphere shall not exceed 50% when the ambient air humidity is+40 ℃. There can be a higher relative humidity at a lower temperature. The average maximum humidity of the wettest month is 90%, and the average minimum temperature of the month is+25 ℃. In addition, the condensation on the product surface due to temperature changes shall be considered.
4. Places without violent vibration and impact vibration;
5. A place protected from rain and snow;
6. The voltage waveform is approximately sine wave.
Single Phase Control Transformer,Control Transformer,Isolation Control Transformer,Machine Tool Control Transformer
Henan New Electric Power Co.,Ltd. , https://www.newelectricpower.com