Any product with a disqualification rate exceeding 4 is a very poor grade. However, what is embarrassing is that in terms of energy-saving lamps, it is still good to achieve this ratio, because this has made great progress compared to the past. From a nationwide perspective, the qualified rate of energy-saving lamp product quality supervision and spot checks has been very low in recent years, and the pass rate of spot checks in Tianjin, Jiangxi, and Guangdong is only about 20%, and the pass rates in Anhui, Shanxi, Chongqing, etc. are only 40%. The appearance of %, and the overall qualification rate of the national energy saving lamp market announced by the State Administration for Industry and Commerce is only 39.3%.
Energy-saving lamps must be popularized to rectify the market order. There are always problems with energy-saving lamp products, and they are old problems that have not been changed for many years. Such as virtual power, this misleading consumption of illegal and unlawful behavior continues. Power determines power consumption, and it also has a certain impact on brightness. It is an important performance indicator for energy-saving lamp products. National standards stipulate that the difference between the power consumed by an energy-saving lamp and its rated power must not exceed 15%. However, the results of market spot checks show that over 70% of the products sold in energy-saving lamps do not have the actual measured value of the product's products. For example, pseudo energy-saving, that is, no energy saving at all, is the place where energy-saving lamps have been the most criticized for years. The initial light effect is a parameter for assessing the energy efficiency level of an energy-saving lamp and is an important indicator reflecting whether an energy-saving lamp product has an energy-saving effect. The index does not meet the requirements of a national standard and directly leads to energy-saving lamps failing to achieve energy-saving effects. Market monitoring shows that almost half of the energy-saving lamp's initial luminous efficacy does not meet the national standard and it does not save energy at all.
Could there be so many problems in energy-saving lamp products because the energy-saving lamp manufacturers' technological level is not relevant? The answer is no. The data shows that China is currently the world's largest producer of energy-saving lamps. The world produces approximately 1.5 billion energy-saving lamps each year, of which 1.3 billion are produced in China. China's energy-saving lamp products are exported to more than 100 countries and regions, of which more than half of the energy-saving lamps in the EU market come from China. The so-called "no diamond drilling, can not cover porcelain activities," China's energy-saving lamps can weigh in the global market, indicating that product quality and production technology are world class.
Since the export of products is excellent, then the problem can only be sold in the domestic market. In fact, the key to the problem lies in this difference. China's major markets for energy-saving lamp products are foreign, and most companies are also foreign trade-oriented companies that rely on foreign markets to survive. Since relying on foreign countries, then the product must meet the requirements of foreign markets, and subject to the "bad negotiable" foreign market, domestic production enterprises must strictly follow the standard production, did not dare to effect. Some media surveys have found that more than 70% of the products of a large-scale energy-saving lamp manufacturer in China are exported. The qualification rate of these products has reached more than 90%, and less than 30% of the products are placed in the domestic market. The pass rate is much lower. The difference between the quality of the same company's production and the quality of domestic sales can only explain one problem: the company intends to do so.
There are two “intentions†in the enterprise: First, the bulk of profits are out of the business. The second is based on fierce competition in the domestic market, and most of them are price wars without technical content. Qualified products of large-scale formal enterprises have no price advantage compared to those of informal enterprises, and only sacrifice the quality for the benefit. Wall outside the flower wall incense, good things are exported, this abnormal phenomenon is precisely the helplessness of the Chinese energy-saving lamp companies and the market's sorrow. In fact, domestically, the poor market objective environment also contributed to this abnormality. The threshold of China's energy-saving lamp industry is too low, and even the 3C certification widely implemented in other industries does not involve energy-saving lamps. It is reported that there are quality assurance of high-quality energy-saving lamps, the market price is more than ten dollars, and poor quality energy-saving lamps only sell three or four yuan. Many consumers are greeted by merchants and greedy for cheaper choices. They have chosen poor quality lamps. If they suffer damage, they will have no confidence in energy-saving lamps and qualified products will not be sold. This creates a vicious cycle.
The phenomenon that the bad coins that have been formed in China's energy-saving lamp market for many years to expel good coins is a good rule. If we want to fundamentally change this situation, in addition to the implementation of a similar "green lighting project" from the positive pull of the fiscal policy, the key must be to improve the relevant laws and regulations and establish a good quality standards and regulatory system.
Energy-saving lamps must be popularized to rectify the market order. There are always problems with energy-saving lamp products, and they are old problems that have not been changed for many years. Such as virtual power, this misleading consumption of illegal and unlawful behavior continues. Power determines power consumption, and it also has a certain impact on brightness. It is an important performance indicator for energy-saving lamp products. National standards stipulate that the difference between the power consumed by an energy-saving lamp and its rated power must not exceed 15%. However, the results of market spot checks show that over 70% of the products sold in energy-saving lamps do not have the actual measured value of the product's products. For example, pseudo energy-saving, that is, no energy saving at all, is the place where energy-saving lamps have been the most criticized for years. The initial light effect is a parameter for assessing the energy efficiency level of an energy-saving lamp and is an important indicator reflecting whether an energy-saving lamp product has an energy-saving effect. The index does not meet the requirements of a national standard and directly leads to energy-saving lamps failing to achieve energy-saving effects. Market monitoring shows that almost half of the energy-saving lamp's initial luminous efficacy does not meet the national standard and it does not save energy at all.
Could there be so many problems in energy-saving lamp products because the energy-saving lamp manufacturers' technological level is not relevant? The answer is no. The data shows that China is currently the world's largest producer of energy-saving lamps. The world produces approximately 1.5 billion energy-saving lamps each year, of which 1.3 billion are produced in China. China's energy-saving lamp products are exported to more than 100 countries and regions, of which more than half of the energy-saving lamps in the EU market come from China. The so-called "no diamond drilling, can not cover porcelain activities," China's energy-saving lamps can weigh in the global market, indicating that product quality and production technology are world class.
Since the export of products is excellent, then the problem can only be sold in the domestic market. In fact, the key to the problem lies in this difference. China's major markets for energy-saving lamp products are foreign, and most companies are also foreign trade-oriented companies that rely on foreign markets to survive. Since relying on foreign countries, then the product must meet the requirements of foreign markets, and subject to the "bad negotiable" foreign market, domestic production enterprises must strictly follow the standard production, did not dare to effect. Some media surveys have found that more than 70% of the products of a large-scale energy-saving lamp manufacturer in China are exported. The qualification rate of these products has reached more than 90%, and less than 30% of the products are placed in the domestic market. The pass rate is much lower. The difference between the quality of the same company's production and the quality of domestic sales can only explain one problem: the company intends to do so.
There are two “intentions†in the enterprise: First, the bulk of profits are out of the business. The second is based on fierce competition in the domestic market, and most of them are price wars without technical content. Qualified products of large-scale formal enterprises have no price advantage compared to those of informal enterprises, and only sacrifice the quality for the benefit. Wall outside the flower wall incense, good things are exported, this abnormal phenomenon is precisely the helplessness of the Chinese energy-saving lamp companies and the market's sorrow. In fact, domestically, the poor market objective environment also contributed to this abnormality. The threshold of China's energy-saving lamp industry is too low, and even the 3C certification widely implemented in other industries does not involve energy-saving lamps. It is reported that there are quality assurance of high-quality energy-saving lamps, the market price is more than ten dollars, and poor quality energy-saving lamps only sell three or four yuan. Many consumers are greeted by merchants and greedy for cheaper choices. They have chosen poor quality lamps. If they suffer damage, they will have no confidence in energy-saving lamps and qualified products will not be sold. This creates a vicious cycle.
The phenomenon that the bad coins that have been formed in China's energy-saving lamp market for many years to expel good coins is a good rule. If we want to fundamentally change this situation, in addition to the implementation of a similar "green lighting project" from the positive pull of the fiscal policy, the key must be to improve the relevant laws and regulations and establish a good quality standards and regulatory system.
Inspection Lifting Column,Motorized Lifting Column,Single Column Car Lift,Telescopic Pneumatic Cylinder
Kunshan Zeitech Mechanical & Electrical Technology Co., Ltd , https://www.zeithe.com