[Home Theater Network HDAV.com.cn] In the process of building a home theater, how to carry out wiring is very skillful. Today, let everyone take a look at how to set up a home theater.
1. How to route when the ceiling space is insufficient?
solution:
First, increase the bottom of the ceiling: Even if there is no space on the ceiling, users can still hide the automatic projector and screen on the special ceiling. The ceiling is mainly used to support and hide large machines in the home theater system, and also adds some architecture to the room according to the needs of users.
Second, installed on the wall: screens and projectors slowly descend from the ceiling to add a lot of color to the home theater, it is also feasible to install these devices on the wall. For example, a flat-panel TV is installed directly in front of the wall, covered with a gauze curtain, and then a starter is installed next to the TV. The gauze curtain is opened or closed by the device, giving the audience a cinematic realism. .
On the other side of the room, mount the projector on the back wall or hide it in the coffee table. The speaker is installed next to it: if there is not enough space on the ceiling, it is not possible to install a ceiling-mounted speaker. In this case, the user can choose the wall-mounted speaker. If the user wants the speaker not to be too conspicuous, the entire wall can be used. The sound structure panels are covered to make the room look beautiful. We can also use a simpler method to paint the speaker color to match the color of the wall.
2. How to make up for the wiring orientation when the sound quality is poor?
solution:
First, changing the room space or rearranging the furniture position can greatly improve the overall sound experience of the room. For example, the user can install a virtual wall in front of or behind the room to change the depth of the room. If you need to adjust the side wall, you can add a sound panel and move a certain distance. At the same time, we can also make full use of other facilities in the room, such as bookshelves and other decorations.
Second, sometimes, many unobtrusive devices in the room have a great effect on the improvement of sound quality, such as the closet in the room, the beveled ceiling or the release wall. Therefore, when installing a home theater system, it is best to consult the installer for the best placement advice, try not to ignore some small details, often the impact of these small details on the sound quality is immeasurable.
3. Cement ground wiring method
solution:
1. If the user is willing to install the cable under the carpet and the floor, you can make a hole in the floor and implant the cable along the corresponding pipe to fully protect the cable.
Second, the hole in the cement floor, the cable is hidden according to the path. The method is good for the cable layout, but it will have a relatively large impact on the overall aesthetics of the room. The overall project is more complicated. If the user feels that the project is too cumbersome, then you can choose a flat cable. The cable is very thin and the thickness is like paper. If it is installed between the floor and the floor, the thickness is basically negligible, and the user is not easy. It is noticed, but there is a drawback in wiring in this way, that is, the floor above the wiring cannot be placed too heavy furniture.
Third, wiring on the floor is the most common way, through the wall wiring is also a good choice. Cables can be mounted behind equipment such as siding and seat.
More fresh and fun home theater information, please pay attention to home theater network http:// (WeChat: cnhifi), the country's most influential home theater audio player interactive media website.
Box Header Connector,Vertical Type Box Header Connector,Dip Vertical Type Box Header Connector,Double Row Box Header Connector
Shenzhen CGE Electronics Co.,Ltd , https://www.cgeconnector.com