(The latest version of U/K/A series shall prevail. The following demo version is U/K/A series 5.0 system)
TV settings include network settings, signal source settings, image settings, sound settings, and factory reset settings. The following one by one.
Network settings
When you want to change the TV network, you can use the remote control to go to the home page - Settings - Network and Connection Settings Network.
If the network connection is unsuccessful:
1. Check if the home network is unblocked;
2, to ensure that the family wireless name does not contain spaces, Chinese characters;
3, try to make the password no less than 8;
4. Try using a wired network connection.
Source settings
If you have external set-top boxes, cool sticks and other devices, you need to switch the signal source. You can directly press the "Set-Top Box" button on the remote control to switch the signal source, or select the signal source in the TV interface to switch.
If you need to set the boot auto start item, the specific method is as follows:
After the remote control homepage interface enters my application--management--self-start management. In addition to boot automatically into the set-top box, you can also set the boot into the TV application
>>If no set-top box is detected
1, check whether the set-top box has been powered on;
2. Check if there is any looseness between the set-top box and the TV plug;
3. If it still does not work, try to reconnect the set-top box STB.
Image settings
If you need to adjust the TV image mode, you can do the following:
Press “Home†on the remote control to enter “Settings†and select the “Image and Sound†setting option to set the image.
Enter the "Image and Sound" of the "Settings" option. There are 4 modes in the image selection item (Standard is soft and soft).
Sound settings
Just like the image settings, the U-Series TV is still adjusted by entering the Settings - Image and Sound settings option.
4 options for sound mode (news movie standard music).
Surround sound can also be set.
reset
Restoring the factory settings clears the TV's cache and formats the TV content. After a successful factory reset, it is recommended to wait 3-5 minutes before restarting the TV again.
TVs in the UK series need to be pressed via the remote control: Home--Settings--Universal Settings--Restore factory settings for factory reset operations.
If you need to learn more about the problem of restoring the factory settings or restoring the factory settings, etc.
Shutdown
Remote Control Press: Home--Settings--Universal Settings--Scheduled Power Off, you can set the time for TV off.
USB4 Cable
USB4 specifies tunneling of:
USB 3.2 ("Enhanced Superspeed") Tunneling
DisplayPort 1.4a -based Tunneling
PCI Express (PCIe)-based Tunneling
Main Benefits of USB 4
The new USB 4 standard has three main benefits over prior versions of USB.
40 Gbps Maximum Speed: By using two-lane cables, devices are able to operate at up to 40 Gbps, the same speed as Thunderbolt 3. The data is transmitted in two sets of four bidirectional lanes.
DisplayPort Alt Mode 2.0: USB 4 supports DisplayPort 2.0 over its alternative mode. DisplayPort 2.0 can support 8K resolution at 60 Hz with HDR10 color. DisplayPort 2.0 can use up to 80 Gbps, which is double the amount available to USB data, because it sends all the data in one direction (to the monitor) and can thus use all eight data lanes at once.
Compatible with Thunderbolt 3 devices: Some, but not necessarily all USB 4 implementations will also work with Thunderbolt 3 devices.
Better Resource Allocation for Video, PCIe: In lieu of alternative mode where the other interface takes over the connection, USB 4 devices can use a process called "protocol tunneling" that sends DisplayPort, PCIe and USB packets at the same time while allocating bandwidth accordingly.
Usb4 Cable,Usb To Usb4,Usb 4 Cable,Usb 4 Wires
UCOAX , https://www.ucoax.com
