CISSOID introduces high temperature 30V small signal P-FET FET

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
TP-IP4220CZ6 5V 0.35PF breakdown voltage 6V SOT
Crystal oscillator
MOSFET imported original FET
Shunuo varistor / ESD varistor / product complete / Sunlord first-class agent

CISSOID , a leader in high-temperature semiconductor solutions, has introduced a new family of planetary families (high-temperature transistors and switches). Mars is a high-temperature 30V small-signal P-FET FET suitable for -55 ° C to +225 ° C high temperature reliable operation. Because it is resistant to extreme temperatures, only 14pF input capacitance and only 400nA gate leakage current at +225° C. So this 30V transistor is very suitable for high temperature sensor interface, such as piezoelectric sensor or Protection amplifier.

This logic-level P-FET source current can be as high as 310mA at 225° C. It can be used to turn on/off and high-impedance devices, such as converting a 3.3/5V logic signal to a high-voltage open source output (its switching time is less than 10ns) If the gate electrode is connected to the source electrode, Mars can be turned into a 30V small signal transistor that can operate reliably at high temperatures.

Mars, coupled with Mercury (N-FET products), can provide electronics engineers with a reliable and simple separation of analog and digital circuits such as pre-regulators, low-dropout regulators, level shifters, and CMOS switches. Or open source/drain logic on the bus.

The product number is CHT-SPMOS30. The TO-39 metal package is available for samples and testing. The price is up to 200 from 129€. For more information, please visit or consult the company's representative. At

Solder Cup Waterproof D-Sub Connector

The Solder Cups D-sub connector, also known as Solder Cups D-sub connector , typically contains a pin layout of 9 pin, 15 pin, 25 pin, 37 pin & 50 pin positions housed in increasing shell sizes accordingly. They are available in both male (plug) and female (socket) variants with the male signal contacts/pins (current rating of 5A) spaced every 2.76mm in horizontal rows and the spacing of rows vertically at 2.84mm laid out half the distance between pins of existing rows.


IP66 IP67 Rated Waterproof D-Sub Panel Mount Solder Connectors
Harsh outdoor or indoor environments can destroy electronic equipment. Standard D-sub connectors are not intended to withstand contaminants such as water and dust. These waterproof solder cup connectors are available in male or female genders and DB9, DB15, DB25, and HD15 sizes. They will accommodate wire ranges from 30 - 20 AWG. Construction features gold plated brass contacts, nickel plated steel shells, and a silicone insulating ring. Maximum recommended panel thickness is 0.078".

Antenk offer a wide range of waterproof standard density and high density male and female high density D-Sub connectors solder cup with stamped and formed Contacts in cable mount used in a variety of demanding applications.


Antenk's Solder Cup D-Sub Connectors Stamped contacts

FEATURES

Solder cup d-subs available in industry sizes/positions

Low cost economy series.

Nickel shells have indents to provide grounding and additional retention.

Low cost & high performance, non-removable stamped contacts.

Optional mounting hardware available.


Antenk's SOLDER CUP D-SUB CONNECTORS Stamped contacts

MATERIALS

Shell: Steel, Tin or Nickel Plated

Insulator: Glass-filled thermoplastic. U.L. rated 94V-O

(230°C process temp)

Stamped contacts: Male pins - Brass | Female pins - Phosphor bronze

Plating: Gold flash on entire contact (contact us for other plating options)



Solder Cup Waterproof D-Sub Connector Stamped & Formed Contact, Solder Cup Waterproof D-Sub Connector Machined Contacts, Waterproof Panel Mount Solder Cup D-Sub Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com

Posted on