The Chongqing Municipal Committee announced the test results of the Caiyuan Road Energy Conservation Demonstration Project yesterday. The four tunnels in this road mainly use LVD and LED lamps. After half a year of trial operation, the total load was reduced from 126.4 kW before the transformation to 64.8 kW, which estimated that the annual electricity consumption could be about 340,000 kWh.
According to reports, there are still 18,000 high-energy incandescent lamps and mercury lamps in the main city, and the most used ones are high-pressure sodium lamps. The above lamps will be replaced by LED (light-emitting diode street light) and LVD (infinite electrode) energy-saving lamps. The former has high brightness and can theoretically save 70% of electricity and has a service life of 100,000 hours. Compared with high-pressure gas discharge lamps, LVD can also save energy by 70%, no maintenance, no pollution, no "more light and less bright", and the service life can reach 100,000 hours. LVD street lights have not been tried in our city.
The demonstration sections of this demonstration are four energy-saving demonstration sections of Caiyuanba Interchange to Longjiawan Tunnel, Huangshaxi Tunnel Upward Tunnel, Huangshaxi Tunnel Downward Tunnel, Huangshaxi Tunnel Exit and Yuanjiagang Interchange.
Electronic Lock Motor product introduction:
Electronic Lock Motor, also known as Intelligent Lock Motor, Belong to small reducer series, the main structure composed of drive motor (motor) with a reduction gear box, composed of a shaft connection, form integrated motor reducer; Drive motor is purchasing product, reduction gear box is customized according to the project product demand, the maximum power under 10 w, maximum voltage up to 12 v, below 25 mm diameter size.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features:China Electronic Lock Motor is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the China Electronic Lock Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc Electronic Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Electronic Lock Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a electronic Lock Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
China Electronic Lock Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Electronic Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Electronic Lock Motor
Electronic Lock Motor,Motor For Electronic Lock,Electronic Lock Dc Motor,Electronic Lock High Speed Motor
Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com