[Measurement for Progressive Education] Hundred Yuan Ao Kema Heater Gives You Warmth in Winter

A new chapter has been opened in 2016, and the cold winter has begun to really come. Keeping warm is one of the things we need to do most of the day. Many homes have air conditioning or floor heating for heating. But I think that as a small area for personal use or office work, a small electric heater is enough. Today's small Aucma heater is a nice little warmer.

Is not a smart product, but an ordinary small household appliances, size is not very big, measurements are only 130mm100mm170mm, and palm size is normal, regardless of where they are not occupy the position. One person uses a similar range, in your office area or home study room, you can use it where you need warmth. Remember: Use only indoors!

This model is NF05ND59 Aucma heater, the overall design of the fuselage is relatively simple, after power on a key to get all the operations, no cumbersome steps, there is no difference between high and low files, there is no left and right swing points, and so on It's easy to open and close one by one.

The rated power of 500W is slightly smaller than that of ordinary household appliances, and there is no need to worry about daily power-on causing excessive power tripping. The use of peace of mind, but still pay attention to dry to prevent the entry of water, the use of the process to prevent accidentally covered with clothes, bedding, masks, socks and other items, so as to avoid unnecessary trouble.

Black and white with the classic color, used in the heater is also very good-looking, stylish atmosphere. The overall white plastic shell packaging, the net cover is made of black aluminum material, and the heater can be seen at a glance. When the power is turned on, the indicator light is on.

The PTC ceramic heating plate is used inside. The temperature rises quickly, the point heats up at a high speed, and it is not easy to be aged. The use time is longer. And unlike the ordinary little sun, there is a luminous effect, so that it can protect eyesight very well. Children with children at home can feel at ease, but be careful.

On the back is the place where the wind exits, heat the wind, pay attention to the use of not to block or race, and let the fan out of the wind. Although things are small, the noise is still there. Because of the limited area of ​​heat and warm air, it is also close to the individual. My feelings of noise are still slightly larger. If I feel at hand, I feel that it will affect my normal working status.

As a dual-purpose heater for the table and field, because it is small, it can be safely placed on the ground or on the desk for heating. Specifically, a power-off switch is added to the bottom for safety considerations. This causes the heater to fall or receive no pressure. Touch this switch, then it will immediately power off, so as to avoid unnecessary fire. It is said that there will be an automatic power-off function when the temperature is too high, but I have not encountered this situation in the use process.

The first use will smell the body with a plastic smell, after a period of time the taste will be a lot lighter, I hope to do a clean-up measures before leaving the factory. Personal advice is better to use or put on the ground, the first hot air is floating upwards, the heat will rise above the heat spread; if placed on the table, because the heat dissipation area is limited, can only be placed next to the hand to prevent touch Fall phenomenon occurs. I have a lot of cold feet in winter, so I need to warm the feet often, but be careful not to put the shoes or feet directly on the net cover or the top of the machine.

A heater less than $100 warms you in the cold winter. Personally feel that it is still very good, warm area is limited, but a person's heating can still be protected, I hope the noise can be reduced again. If there is a place where the handle or the holding is better, it is more convenient to move. If there is only one person in the winter, to save a little electricity, it is enough to give yourself a little warmth.

Power Meter Socket

Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.
Built-in 3.6V rechargeable Batteries ( . The purpose of the batteries is to store the total electricity and memory setting
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,
press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from
one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current power which ranges in 0.0W 〜 9999W. LCD on third line displays the current electricity costs which ranges in O.Ocost 〜 9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: Time/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which
means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000KWH 〜 9999KWH without other figures. LCD on third line displays"DAY"- "1 'Will be showed on numerical part(the other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untill the maximal cumulative time of 9999 days.
Mode 3: TimeA^bltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V 〜 9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ 〜 9999Hz without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.LCD on second line displays load current which ranges in 0.0000A 〜 9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 LOOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 dones. LCD on
second line displays the minimum power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: Time/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line displays the''OVERLOAD[ with booming noise to warn the users, (selectable choice)
Supplemental informations:
1: Except [OVERLOAD[ interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third line described in this intruction take section according to two black lines on LCD screen. Here it added for clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&"Down" are in no function under un-setting mode.
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg O.OOCOST/KWH ),the rendered content begins moving up and down which means that the device
has entered the setting mode. After that, press FUNCTION for swithing , then press "UP"and "DOWN" button again to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After setting all above, press COST to return to Mode7 or it will automatically return to Mode7 without any pressing after setting with data storage.

Power meter socket, Energy meter socket, Energy meter cost socket, Power meter cost socket, Energy power meter socket

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com

Posted on