The most common problem with the car audio system is between the amplifier and the host. The first is the signal output problem. Not all hosts can be connected to the amplifier. To have an external amplifier host, there must be at least one set of pre-outputs, and a better host will have more than three sets. Followed by the output signal voltage of the host to more than 2 V, the host fidelity can reach 4 V, so that it can ensure good amplifier "raw material" for processing. Since the power source of the power amplifier is independent of the host, there is generally no problem in the power mix between the host and the power amplifier.
The most common problem with the car audio system is between the amplifier and the host. The first is the signal output problem. Not all hosts can be connected to the amplifier. To have an external amplifier host, there must be at least one set of pre-outputs, and a better host will have more than three sets. Followed by the output signal voltage of the host to more than 2 V, the host fidelity can reach 4 V, so that it can ensure good amplifier "raw material" for processing. Since the power source of the power amplifier is independent of the host, there is generally no problem in the power mix between the host and the power amplifier.
The most common problem with the car audio system is between the amplifier and the host. The first is the signal output problem. Not all hosts can be connected to the amplifier. To have an external amplifier host, there must be at least one set of pre-outputs, and a better host will have more than three sets. Followed by the output signal voltage of the host to more than 2 V, the host fidelity can reach 4 V, so that it can ensure good amplifier "raw material" for processing. Since the power source of the power amplifier is independent of the host, there is generally no problem in the power mix between the host and the power amplifier.
The most common problem with the car audio system is between the amplifier and the host. The first is the signal output problem. Not all hosts can be connected to the amplifier. To have an external amplifier host, there must be at least one set of pre-outputs, and a better host will have more than three sets. Followed by the output signal voltage of the host to more than 2 V, the host fidelity can reach 4 V, so that it can ensure good amplifier "raw material" for processing. Since the power source of the power amplifier is independent of the host, there is generally no problem in the power mix between the host and the power amplifier.
The most common problem with the car audio system is between the amplifier and the host. The first is the signal output problem. Not all hosts can be connected to the amplifier. To have an external amplifier host, there must be at least one set of pre-outputs, and a better host will have more than three sets. Followed by the output signal voltage of the host to more than 2 V, the host fidelity can reach 4 V, so that it can ensure good amplifier "raw material" for processing. Since the power source of the power amplifier is independent of the host, there is generally no problem in the power mix between the host and the power amplifier.
Flat Control Cable Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.
Raw cable can be UL2651, UL20251 ,etc
Flat cable, IDC cable, flat cable wiring, ribbon cable harness, flexible flat cable
ETOP WIREHARNESS LIMITED , https://www.wireharnessetop.com