Recently, many users have reported that they can't log in when setting up the WiFi extender with their mobile phones. So today, Xiaobian will answer this question for everyone.
Let's take the Tengda A9 and A12 as examples. Tenda WiFi Extender A9 and A12 support mobile phone/ipad settings. The following tutorials are mainly for the problem that you cannot log in to the setup interface when you set up the WiFi extender for the first time with your mobile phone.
First, the phone / ipad is not connected to the expander WiFi
This is an old problem. Many small white users have not carefully read the installation guide before setting it up. They think that it is wrong to open the phone and enter the setting interface. Please make sure that the WiFi signal of the signal extender is connected to the phone before setting.
I don't know the WiFi name of the expander. You can directly view the label of the expander body (as shown below). The WiFi of the Tenda expander has no password by default, and can be directly connected.
Second, the address is entered incorrectly
Address error: The management interface address of Tenda WiFi expander is re.tenda.cn or 192.168.0.254. Do not enter an address such as 192.168.0.1. 192.168.0.1 is the management address of the router. There is a difference between the two.
Input location error: Some users often enter the management address into the search bar of the search engine, resulting in the inability to open the management interface. The correct one should be entered into the "address bar".
Third, confirm whether the mobile phone / ipad obtains an IP address
Under normal circumstances, the phone will receive an IP address of 192.168.0.X (X=2-253) after connecting to the expander. If the obtained IP address is incorrect, you can try to disconnect the WiFi and reconnect. If it is still invalid. Restore the expander to the factory settings (press and hold the RST button for about 10 seconds), and then check whether the IP address obtained after connecting to WiFi is correct.
The method for viewing the IP address of the mobile phone is as follows:
There may be users who ask, although the phone settings are very convenient, but I still can't install them. What should I do? Tenda A9/A12 with Tenda intelligent router F9, free installation!
Designed for small white users, no need to set up, Tenda A9/A12 can be automatically paired with router F9. Power on the A9/A12 within one meter of the router F9. No operation is required. When the indicator of the A9/A12 is green, the WiFi signal expansion is successful.
Since the management IP address of the WiFi expander will change after the expansion, if you want to enter the interface of the expander after extending the WiFi signal, it is recommended to log in to the upper-level router management interface first, and find the MAC address on the extension body label in the client list. The device can find the IP assigned by the router to the expander, and then use the IP address to log in to the expander interface.
The above method is suitable for the case where the main route is the same as the SSID of the expander.
Tengda A12 is a 3-antenna wireless signal expander designed for large-scale multi-family houses, duplex buildings, villas, rural self-built buildings and neighboring network sharing. It is the best choice for eliminating wireless signal blind spots and enjoying high-quality and smooth networks. .
The major application of solar energy are as follows: (a) Solar water pumping (b) Solar led lights (c) Solar distillation (d) Solar portable power (e) Solar drying of agricultural and animal products (f) Solar Carport (g) Solar Battery (h) Solar electric power generation (i) Solar thermal power production (j) Solar green houses.
Sunket is professional on supplying all these solar products
Solar Application,Solar Lights ,Solar Pump System,Solar Carport,Portable Power Station
Wuxi Sunket New Energy Technology Co.,Ltd , https://www.sunketsolar.com