Semiconductor lighting standard is ready

The National Lighting Standardization Technical Committee has passed 15 LED national standard review drafts at the recently concluded working meeting and is currently awaiting the approval of the National Standardization Administration. If approved, these 15 standards will likely become the national standard, and the LED industry will Based on the hardware of the seven bases, it is enriched in software such as technical standards.

LED industry urgently required the introduction of standards

Although as an emerging lighting industry, LED has the advantages of energy saving, longevity, high efficiency, etc., but after all, belongs to the lighting industry's "newborn", and its problems are increasingly emerging. According to the relevant person in charge of the National Lighting Standardization Technical Committee, LED product quality is the biggest bottleneck restricting the development of the industry, coupled with lack of corporate service awareness and no uniform product quality standards, some manufacturers have low-priced dumping, leading to the development of the LED industry Failed to increase speed in time. In addition, the high price has become the biggest "stumbling block" for LED development and even popularization.

The lack of standards has brought problems to the company's production. Even at the time of 3C certification, the certification body is powerless. Moreover, when the state issues some preferential policies, due to the lack of standards, the LED industry is also difficult to participate in, for example, some time ago, the state subsidies for energy-saving products, LED lighting products because there is no energy efficiency standards, was rejected outer.

Whether it is the government or the enterprise, we are all optimistic about the future of the LED industry. In creating a conservation-oriented, environmentally-friendly society today, LED has become the new darling of the lighting industry. At the LED international exhibition held in Shenzhen last month, new LED products emerged in an endless stream. The scope of application was gradually infiltrated into the field of furniture lighting from the original landscape lighting, decorative lighting and other fields. LED display lamps, LED ceiling lamps and LED fluorescent lamps even appeared at the exhibition. Wait. LED lighting will gradually advance from the outdoor lighting to the indoor lighting direction, and it will take a revolutionary step for the full application of LED products.

The use of LEDs can be broadened, eventually realizing the dream of entering the homes of the people, which will provide a broader world for the development of the LED industry. "With the cost reduction, LED can certainly be achieved in the field of general lighting." The industry's demand for related standards is even more urgent.

The time for standard setting is ripe

The healthy development of an industry requires a regulatory constraint. The formulation of LED national standards is being carried out in an orderly manner. At present, the draft standard has basically been completed. It is reported that dozens of companies participated in the development of the LED "national standard", a total of 15 items.

The standard review draft mainly includes:

1. "General Terms and Definitions of LED and LED Modules for Lighting"

The institutions involved in standard setting are: Zhejiang Sunshine Group Co., Ltd., Tongxiang Shenghui Lighting Co., Ltd., Shenzhen Haohao Hi-tech Development Co., Ltd., and Beijing Electric Light Source Research Institute.

2. "General lighting LED test method"

The institutions involved in standard setting are: Hangzhou Yuanfang Optoelectronics Information Co., Ltd., Zhongshan Weilai Lighting Co., Ltd., Shenzhen Zhongdian Lighting Co., Ltd., Zhongshan Op Lighting Co., Ltd., Shenghui Lighting (Zhejiang) Co., Ltd., and the State. Electric Light Source Quality Supervision and Inspection Center (Shanghai).

3. "Safety Requirements for LED Modules for General Lighting"

Institutions involved in standard setting include: Guangzhou Electrical Safety Inspection Institute, Beijing Electric Light Source Research Institute, Zhongshan Guzhen Lighting Engineering R&D Center, Shenzhen Haohao Hi-tech Development Co., Ltd., Shanghai Yaming Bulb Factory Co., Ltd., Shenghui Lighting Appliances ( Zhejiang) Co., Ltd., Nanjing Henderson Technology Co., Ltd., Zhongshan Huayi Lighting Co., Ltd., Honeywell Langneng Electric System Technology (Guangdong) Co., Ltd., Zhongshan Oupu Lighting Co., Ltd., National Electric Light Source Quality Supervision and Inspection Center (Shanghai).

4. "Performance Requirements for Light Emitting Diodes for General Lighting"

The institutions involved in standard setting are: Hangzhou Yuanfang Optoelectronics Information Co., Ltd., Shenzhen Haohao Hi-tech Development Co., Ltd., Osram (China) Lighting Co., Ltd., Tongxiang Shenghui Lighting Co., Ltd., Guangzhou Electrical Safety Inspection Institute, Guangdong Dongsong. Sanxiong Electric Co., Ltd., Foshan Quality Measurement Supervision and Inspection Center, Heshan Yinyu Lighting Co., Ltd., Zhongshan Oupu Lighting Co., Ltd.

5. "Performance Requirements for LED Modules for General Lighting"

The institutions involved in standard setting are: Guangzhou Electrical Safety Inspection Institute, Hangzhou Yuanfang Optoelectronics Information Co., Ltd., Zhongshan Guzhen Lighting Engineering R&D Center, Shanghai Yaming Bulb Factory Co., Ltd., Shenzhen Zhongdian Lighting Co., Ltd., and Tongxiang Shenghui Lighting Co., Ltd. Electric Appliance Co., Ltd., Zhongshan Shanmu Display Technology Co., Ltd., Zhongshan Huayi Lighting Co., Ltd., Nanjing Henderson Technology Co., Ltd., National Electric Light Source Quality Supervision and Inspection Center (Shanghai).

6. "Safety requirements for self-ballasted LED lamps above 50V for general lighting"

The organizations involved in standard setting are: Xiamen Tongshida Lighting Co., Ltd., Shenghui Lighting (Zhejiang) Co., Ltd., Zhongshan Oupu Lighting Co., Ltd., Nanjing Henderson Technology Co., Ltd., and Honeywell Longneng Electrical Systems. Technology (Guangdong) Co., Ltd., Shenzhen Xingyedi Electronics Co., Ltd.

7. "Performance Requirements for Self-Balancing LED Lamps for General Lighting"

The organizations involved in standard setting are: Xiamen Tongshida Lighting Co., Ltd., Beijing Electric Light Source Research Institute, Tongxiang Shenghui Lighting Electric Co., Ltd., Zhongshan Oupu Lighting Co., Ltd., Nanjing Henderson Technology Co., Ltd., and Guangdong Heshan City. Silver Rain Lighting Co., Ltd.

8. "Road Lighting LED Lights"

The institutions involved in standard setting are: Zhejiang Provincial Lighting Institute, Dongguan Qinshang Optoelectronics Co., Ltd., Dongguan Mingjia Electronics Industry Co., Ltd., Tianjin Zhonghua Huaxiang Electronics Co., Ltd., Shanghai Yaming Bulb Factory Co., Ltd., Jiangsu Civil and Industrial and mining lighting product quality supervision and inspection center, Tongxiang Shenghui Lighting Appliance Co., Ltd., Zhongshan Huayi Lighting Co., Ltd., Nanjing Henderson Technology Co., Ltd., Dongguan City Coruid Digital Photoelectric Technology Co., Ltd., Jiangsu Yaxi lighting Lighting Co., Ltd., Shanxi Guangyu Power Co., Ltd., Zhejiang Qiushi Information Electronic Co., Ltd., Guangdong Heshan Yinyu Lighting Co., Ltd., Beijing Zhongan Infinity Technology Co., Ltd., Shenzhen Bangbel Electronics Co., Ltd., Xi’an Liming Electronic Technology Co., Ltd., Hangzhou Remote Optoelectronics Information Co., Ltd.

9. "Control device for lamps - Part 14: Particular requirements for DC or AC electronic control devices for LED modules"

The organizations involved in standard setting are: China Quality Certification Center, National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Guangdong Panyu District Zhongde Electric Control Co., Ltd., Foshan Huaquan Electric Lighting Co., Ltd., Dongguan Mingjia Electronics Industry Co., Ltd. Company, Zhongshan Oupu Lighting Co., Ltd., Tongxiang Shenghui Lighting Electric Co., Ltd., Shunde District, Foshan City, the State Electric Co., Ltd., Huizhou NVC Optoelectronics Technology Co., Ltd., Nanjing Henderson Technology Co., Ltd., Honeywell Long Energy Electrical System Technology (Guangdong) Co., Ltd. and Jiangxi Mingpai Optoelectronics Technology Co., Ltd.

10. Particular Requirements for Connectors for LED Modules in Miscellaneous Lampholders Part 2-2

The institutions involved in the standard setting are: China Quality Certification Center, Beijing Electric Light Source Research Institute, Tongxiang Shenghui Lighting Electric Co., Ltd., Shenzhen Haohao Hi-tech Development Co., Ltd., Foshan Shunde District Benbang Electric Co., Ltd., and Zhongshan Xiaolan. Zhenxin Xin Wire Connector Factory.

11. "Performance Requirements for DC or AC Electronic Control Devices for LED Modules"

The organizations involved in standard setting are: National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Foshan Huaquan Electric Lighting Co., Ltd., Guangdong Panyu District Zhongde Electric Control Co., Ltd., Shenzhen Haohao Hi-tech Development Co., Ltd., Dongguan City Mingjia Electronics Industry Co., Ltd., Shanghai Yaming Bulb Factory Co., Ltd., Zhongshan Oupu Lighting Co., Ltd., Tongxiang Shenghui Lighting Appliance Co., Ltd., Zhongshan Huayi Lighting Co., Ltd., Shenghui Lighting (Zhejiang) Co., Ltd. Honeywell Longneng Electric System Technology (Guangdong) Co., Ltd. and Nanjing Henderson Technology Co., Ltd.

12. "LED lamp for decorative lighting"

The institutions involved in standard setting are: Beijing Dianguang Research Institute, Zhongshan Weilai Lighting Co., Ltd., Dongguan Qinshang Optoelectronics Co., Ltd., Tongxiang Shenghui Lighting Appliance Co., Ltd., Zhongshan Huayi Lighting Co., Ltd., and Guzhen Town, Zhongshan City. Di Aisheng Lighting Factory, Shenzhen Zhongzhao Lighting Manufacturing Co., Ltd., Guangdong Heshan Yinyu Lighting Co., Ltd.

LED standards for the industry to expand space

The relevant experts of the National Lighting Standardization Technical Committee stated that after the "national standard" is issued, enterprises have "regulations" to follow and will be mass-produced, and the price of the products will be reduced, and they will really occupy the market. A mature industrial chain must have standardized standards. Before the company goes to the “national standard”, it will gain more room for development than its competitors.

Although the current timetable for the enactment of LED standards has not yet been confirmed, it is foreseeable that after the introduction of the national standard, the LED industry will face a huge reshuffle. People in the industry believe that if the national standard is formally implemented, many companies will be eliminated. Some business owners stated that after the implementation of the national standard, the cost of each LED lighting product will increase by 8-10 yuan. At present, the LED market is not perfect, and the profit of some products is only 3 yuan, or even insufficient. Based on this calculation, it is certain that half of companies face reshuffle.

According to the person in charge of the National Lighting Standardization Technical Committee, it is still a long time before the introduction of the national standard. There is still a buffer time for the company. It is imperative to strengthen the reserve of talent and technology and wait until the national standard is actually implemented.

After the introduction of the LED standard, it will promote the further standardization of the LED industry and guide the industry from disorderly, non-standard state to orderly and standardly enter the market.